Replacement Parts

Our glass wind guard can be used with any American Gas Lamp Works single open flame burner to provide extra protection from the wind around the burner. Glass measures 3 1/8″OD x 4″H Plate measures 3 1/4″OD Center hole of plate measures...

  Wind Guard Installation Instructions (WG1, WG3 & WG4) Our wind guard can be used with any American Gas Lamp Works single open flame burner to provide extra protection from the wind around the burner. Included will all lamps...

  AGLW Lamp Lighter Installation Instructions (IG1) Our proprietary automatic electronic ignition system will automatically sense and relight your gas lamp upon blowout any time of day. It also senses sunlight and can turn your lanterns on...

Lava rock accompanies our Maui torch to create a tropical vibe and bring outdoor entertainment spaces to life. Included with all Maui torches or can be purchased separately  

The rubber globe gasket is used with our Model 1700: Heritage lamp. It sits below the globe, between the globe and the base of the lamp. To be used with our Heritage Lamp (Model 1700) and Heritage Globe (G1C) Included with all Heritage lamps...

Flat, tempered glass is included with all four-sided and six-sided American Gas Lamp Works lamps. Model G3T: Models 1800, 1900, 2000 & 23008 1/4″W (top) x 4 7/16″W (bottom) x 8″HModel G9T: Models 1000, 1200,...

  Beveled Glass Installation Instructions (G3B, G9B, G2B & G6B) Choose beveled, tempered glass to add a dash of sparkle to any of our Classic or European series lamps. Model G3B: Models 1800, 1900, 2000, 23008 1/4″W (top) x...

UL Listed For Natural Gas Listed 68VM Regulator Model 5004 Max Inlet Pressure: 150 PSI Outlet Pressure: 7” WC Inlet threads are ¼” and outlet threads are 3/8”

A gas lamp valve is provided with all gas lamp purchases. Valves are available with or without an orifice and are located in the collar of the lamp. Valves control the gas flow from the main gas supply to the burner in the lamp. To be used with all...

Copper gas internals can be purchased with an American Gas Lamp Works post or purchased separately. The copper internals connect the gas valve in the lamp to the main gas supply. Copper tubing available in 7’9″, 8′, 9′,...

The chimney holder, along with the chimney, adorns the single upright gas mantle burner (UPB). Solid brass For use with upright gas mantle burner (UPB)

The chimney, along with the chimney holder, adorns the single upright gas mantle burner (UPB). Pyrex glass For use with upright gas mantle burner (UPB) Measures 2″OD x 6″H

E12 candelabra base LED bulb For use with our inverted electric socket assemblies 4.5 watt LED 450 lumens 2,700 kelvin color temperature

The Smooth 4″ Reducing Collar can be used with any 4″OD smooth post to accept a 3″ID lamp collar. Used with 4″OD Smooth Colonial post series (EPC4S) 3 set screws included with the reducing collar Slides over the post and...

The 3.5″ Reducing Collar can be used with any American Gas Lamp Works 3.5″OD smooth post, to accept a 3″ID lamp collar. Used with 3.5″OD x 2.90″ID smooth posts Slides into the post and secures to the post with the set...